Used Cushion Tire Forklift Oceanside - Forklift trucks are commonly classified by the kind of work they complete as well as the kind of tire they use. There are two main kinds of tire classification for forklifts, pneumatic and cushion tire.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. Cushion tires cost less to make and are easier to take care of. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. Cushion tires are also better suited to applications in tight spaces. This is because they offer a turning radius that allows for movement around tight corners. Forklifts that use cushion tires can be lower to the ground compared to pneumatic tire models and the increase in vertical clearance is welcome for many applications. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. Solid resilient pneumatic forklifts are a better option in areas that may have objects which could puncture a standard air pneumatic, such as junkyards, lumber yards and the like which may have sharp metal objects.
Benefits of Cushion Tire Forklifts
Forklifts fitted with cushion tires are a good option for operation on smooth surfaces, both indoor and outdoor. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. Warehousing applications and manufacturing facilities often rely on cushion tire forklifts. Work which requires forklift operations in tight areas, such as narrow aisles, are ideal for the use of a cushion tire forklift.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
With little to no risk of a tire puncture, cushion forklift models are easy to maintain and ultra-durable.
4) Quiet
Most cushion tire forklift models use a fuel cell or battery as opposed to an internal combustion engine and are much quieter compared to their diesel or propane counterparts.
5) Environmentally Friendly
Again, because most cushion tire forklifts are powered by electricity, rather than an internal combustion engine, cushion tire forklifts produce no harmful emissions.
Forklift Tire Choice
The forklift frame typically depicts whether a cushion tire or a pneumatic tire will be utilized. Axles and tires are specific to a forklift frame and lifting capacity. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are popular for a variety of job sites. If most of the transporting, lifting loads and placement happens inside or with limited outdoor use on smooth surfaces, cushion tire forklifts are your best choice.
Sitting closer to the ground, cushion tire forklifts have a tinier frame compared to pneumatic tire forklifts. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. It is important to note that cushion tire forklifts showcase less ground clearance and the machine may get caught up on exterior obstacles if the ground is uneven. One solution is to outfit traction tires on the front of the cushion tire forklift. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. However, it is still not recommended to drive on dirt or grass and it must be noted that the same type of tire must be used on the opposite sides, drive and steer axles.
One of the top advantages of the cushion forklifts is their tight turning radius. Cushion tire forklifts are excellent for manufacturing facilities and warehouse operations that are compact with less space. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Pneumatic tires forklifts have air in them and are better for outdoor use such as in yard work or on gravel. Some interior locations may utilize pneumatic tire forklifts; however, they do not offer a small turning radius or the lower clearance and maneuverability that the cushion tires provide. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. Pneumatic tire forklifts are longer and wider than cushion tire forklifts which is why they are primarily used outdoors.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. However, air pneumatic tires are susceptible to being punctured or gouged. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Flat tires can be filled with foam to keep them more durable and prevent flats. It is necessary to plan for enough time when foam filling an air pneumatic tire as it can take up to 3 days to fill and cure properly.
Difference in Load Capacity
The load capacity of cushion tire forklifts and pneumatic tire forklifts are about equal. Some electric powered cushion tire forklifts do have lift limits. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
