In nearly all cases, most individuals spend quite a bit of money purchasing their lift truck. Thus, it is very essential to take proper care of it so as to protect your investment well into the long run. It is a good idea to know the procedures that are carried out in the care and maintenance of this piece of machinery.
Among the best ways to tell how good the engine is performing is by starting the forklift up and listening carefully to see how it runs. Like for example, if there are any misses or knocks, the machine is faulty and this should raise several concerns. Additionally listen carefully for any squealing sounds that come from the belts as these noises would provide you with a lot of information.
When carrying out maintenance, some of the main parts you will need to pay attention to comprise the horn, safety warning devices, the lights, the gauges and the overhead guard. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also vital to check the wiring.
When the above components have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each battery cell has to be inspected so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters need to be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been done and new filters have been fitted, visually check the drive axle from beneath the equipment. Be sure to grease the axle if there is any grease fitting. Inspect the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. After that, inspect each and every other part of the equipment including the wheels. If any kind of fault or concern is detected, be certain to address it immediately so as to make certain the equipment is running at its safest and optimum levels.