Utilize a Pneumatic Forklift
Pneumatic forklifts are common in warehouse and shipping operations. Also known as pallet trucks or pump trucks, they are utilized to transport products and materials around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight has a pump which raises the forks off the ground. A pallet truck is designed to be operated by one individual.
To be able to prevent loosing control while raising heavy loads, pallet trucks must always be operated carefully. Machine must be checked before operating. Clear the wheels area of any obstacle. Check that the handle can turn smoothly. The pallet must be stacked carefully to be able to guarantee that nothing would fall off during transportation.
On the end of the pallet truck's handle, squeeze the level situated on the inside of the metal loop to release the air in the pump and lower the forks. The forks can then be pushed into the slots of the pallet. The forks must be at the center in order to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not raise the pallet very high or the forklift can unbalance.
Move the pallet by pulling on the handle and dragging it behind you. It is truly not safe to push the pallet ahead of you because the thrust can cause it to go out of control. Slowly take turns and don't try to stop suddenly. Slowly come to a stop, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.