The type of vehicle usually found inside factories, warehouses and different work sites where moving heavy materials from one location to another is required is called a forklift. The mast is the mechanism located on the front of the forklift that hydraulically raises and lowers the load. The "cat" is the area which is protected where the operator of the forklift sits.
Forklifts can lift loads that weigh between one to five tons. Several kinds can be utilized to carry shipping containers and loads that are much heavier.
The tires of a forklift should be checked and maintained regularly. The kinds of tires on different forklifts differ according to factors like for instance ground surfaces, frequency of use and load weights. Every driver of a forklift should have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
Perform tire inspections regularly. Watch for indications of damage and wear to the tires. If the wear on the tire exceeds 40 percent, it needs to be replaced.
When you purchase tires, be certain you buy the correct kind - solid, pneumatic or polyurethane.
When you have to replace the tires, the forklift jack should be positioned under the tire. You could easily change the tires if you raise the forklift high enough.
You can use the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and properly secure it. If you are changing more than one tire and you have just one jack, lower the forklift, then reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is too big for both in-house and mobile tire presses, the damaged tire must be transported to a shop which has a stationary tire press.