Inspect a Forklift
Based on HRSDC and OSHA statistics, there are around 10,000 forklift-related worklplace injuries every year within North America. Some injuries result from the lack of correct equipment inspection and maintenance of the machine. Other injuries are due to operator error.
Injuries are not the only problems which are related to the operation and maintenance of lift trucks. One more serious issue is damage to property. Lift truck mishaps could cause damage to sprinklers, overhead pipes, and other machines as well as building walls. By completing thorough inspections every day, you could help lessen forklift injuries.
When starting an inspection, turn the engine off. Check the levels of the engine oil, fuel, hydraulic oil, coolant and brake fluid. Visually inspect the machine's tires looking for signs of wear, general condition and appropriate air pressure. Visually inspect the forks on the front of the machine too. Confirm the condition of the top-clip retaining pin and heel. Check that the backrest is firmly attached. Make sure that the finger guard and overhead are attached. Visually check the stops and cables, the hydraulic hoses and the mast chains too.
You should check the propane tank if you are utilizing liquid propane of LP forklifts. Look for any signs of rust, corrosion or damage. Be sure that the battery has enough levels of electrolyte and which is sufficiently charged. Visually check all belts. Check to verify the location of the owner's instruction manual and make certain it is situated in the designated on-board storage compartment. Confirm the hood latch and make sure that it is functioning as it is supposed to. Inspect the seatbelt and make sure it is working properly and latches securely.
You could turn the engine on after you have done all the steps mentioned above. Listen carefully to the engine. Investigate any strange sounds immediately. Make sure that both the service brake and the parking brake are properly working. Confirm that the accelerator and the steering controls are operating at optimum performance levels.